CUDA FRONT-LOAD PARTS WASHER MODELS

Rugged, high-capacity Cuda Automatic parts washers use pressurized hot water and specialized industrial detergents to safely blast away dirt, grease and grime while you are doing more productive work.

Solvents have serious heath effects, disposal problems and are becoming a thing of the past. Replace your solvent tank to a get safer and better cleaning alternative.

Cuda is the leading innovator in parts washers. You get the best performance and more standard features & options than with any other brand.

The Cuda “Slide-In Door Design” is not only a space saver in your shop, but it also reduces any dripping or condensation falling on the floor while the door opens thus reducing the potential for slip/fall accidents.

Don’t waste time – Load & Go. A single parts washer can support three or four technicians, which allow them to complete more constructive tasks.

1-Year WarrantyThe 90-day labor warranty for all Cuda parts washers is automatically extended to a 1-Year Labor Warranty with exclusive use of Cuda detergents. Cuda parts washers are also covered by a 1-year parts warranty.

CUDA 2530: OUR SMALLEST FRONT-LOAD
  • 30-INCH WORKING HEIGHT
  • 25-INCH TURNTABLE
  • 500-LB LOAD CAPACITY
  • 3 HP VERTICAL SEALLESS PUMP PRODUCING 50 GPM @ 45 PSI
  • OPERATES AT 150-170 DEGREES F
  • DIMENSIONS – 48″L X 45″W X 74″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
CUDA 2840: THE NEXT SIZE LARGER
  • 40-INCH WORKING HEIGHT
  • 28-INCH TURNTABLE
  • 1000-LB LOAD CAPACITY
  • 3 HP VERTICAL SEALLESS PUMP PRODUCING 50 GPM AT 45 PSI
  • DIMENSIONS – 51″L X 50″W X 80″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
CUDA 2848: THE BIGGEST OF THE SMALL
  • 48-INCH WORKING HEIGHT
  • 28-INCH TURNTABLE
  • 1000-LB LOAD CAPACITY
  • 5 HP VERTICAL SEALLESS PUMP PRODUCING 150 GPM AT 50 PSI
  • DIMENSIONS – 51″L X 50″W X 88″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
CUDA 3648: NEW MID-RANGE WASHER
  • 48-INCH WORKING HEIGHT
  • 36-INCH TURNTABLE
  • 2500-LB LOAD CAPACITY
  • 113-GALLON SUMP CAPACITY
  • 7.5 HP VERTICAL SEALLESS PUMP PRODUCING 150 GPM AT 50 PSI
  • DIMENSIONS – 57″L X 49″W X 94″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
CUDA 4860: LARGE parts
  • 60-INCH WORKING HEIGHT
  • 48-INCH TURNTABLE
  • 5000-LB LOAD CAPACITY
  • 156-GALLON SUMP CAPACITY
  • 7.5 HP VERTICAL SEALLESS PUMP PRODUCING 200 GPM AT 50 PSI
  • DIMENSIONS – 75″L x 66″W X 105″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
  • 18KW HEATER
  • OPTIONAL HEIGHT EXTENSIONS
CUDA 7248: WIDE SIZE
  • 48-INCH WORKING HEIGHT
  • 72-INCH TURNTABLE
  • 5000-LB LOAD CAPACITY
  • 200 GALLON SUMP CAPACITY
  • 7.5 HP VERTICAL SEALLESS PUMP DELIVERING 160 GPM @ 45 PSI
  • DIMENSIONS – 100″L X 85″W X 100″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
  • PUSH BUTTON TABLE JOG • LOW WATER SHUTDOWN
  • REAR FORKLIFT EXTENSION POCKETS PROTECT ELECTRICAL EQUIPMENT
  • STAINLESS STEEL SUMP DOORS
CUDA 7272: WIDE & TALL
  • 72-INCH WORKING HEIGHT
  • 72-INCH TURNTABLE
  • 5000-LB LOAD CAPACITY
  • 200 GALLON SUMP CAPACITY
  • 7.5 HP VERTICAL SEALLESS PUMP DELIVERING 150 GPM @ 55 PSI
  • DIMENSIONS 100″L X 85″W X 126″H
  • AVAILABLE IN STAINLESS STEEL & MILD STEEL
  • PUSH BUTTON TABLE JOG
  • LOW WATER SHUTDOWN
  • REAR FORKLIFT EXTENSION POCKETS PROTECT ELECTRICAL EQUIPMENT
  • STAINLESS STEEL SUMP DOORS
Space Saver
Roll-In Door

Allows easy access to the entire wash chamber, and requires no additional clearance above or in front of the machine.

Front Access
Debris Screen

The patented front access debris screen filters debris particles from the wash solution to ensure clear spray nozzle operation, and also provides a safeguard against small parts that might accidentally be washed through from the cleaning chamber. The debris screen is standard on all Cuda Parts Washers.

Integrated Oil Skimmer

All Cuda top-load parts washers have simple control panels for the heater, wash cycle operation and a low-water shut-off indicator.

Control Panel

Easy to understand and operate; located at eye level.

OPTIONS

  • Pneumatic Power Brush – Rotating at 1800 rpm, the steel bristles effortlessly whisk away even stubborn carbon deposits and gasket material.
  • Detail Tray with Dedicated Sump – The detail tray folds down to provide a convenient work area for the power brush and hand detail brush. The dedicated sump, completely independent of the main sump, can be filled with any type of cleaning solution.
  • Preferred Options Package – Parts Tree, Parts Basket, Containment Ring and Oil Container
  • Deluxe Kit – Includes Detail and Power Brush with Side-Mounted Tray, Sink and Sump
  • Height Extensions (factory installed) provide extra height in the wash area (2848 & 4860 only)
  • 2-Tier Turntable – Adds second turntable for greater capacity
  • 4-Hook Parts Tree – To Hang Parts
  • Heater & Skimmer Timers – 24 hour / 7 Day
  • Filtration & Sump Sweep (field installed only) – Quickly removes sediment from the sump floor through 100 micron filters to help extend the life of wash water
  • Automatic Water Fill – Automatically adds water if water level drops
  • Hour Meter – Displays elapsed time
  • 60-Mesh Debris Screen Tray Insert – Provides more thorough screening of sump solution
  • Containment Rings – 25″, 28″ 36″ & 48″ diameter – keeps parts on turntable
  • PK-100D Sump Cleaner – Provides an economical and efficient way to process and extend the life of wastewater
  • Oil Drain Container – Collects oil from skimmer
  • Small and Large Parts Baskets – For smaller parts cleaning
  • Waste Water Drum Evaporator – Ideal for eliminating very low volumes of waste water for drying sludge
  • Stainless Steel Upgrade – Available for all models, call for quote

SPECIFICATIONS

 Model 2530 Series 2840 Series 2848 Series 3648 Series
 Working Height  30 Inches  40 Inches  48 Inches  48 Inches
 Turntable Diameter 25 Inches 28 Inches 28 Inches 35 Inches
 Load Capacity  500 lbs.  1000 lbs.  1000 lbs.  2500 lbs.
 Number of Nozzles 12 12 18 21
 Pump Capacity  50 GPM @ 45 PSI  50 GPM @ 45 PSI  50 GPM @ 50 PSI  150 GPM @ 50 PSI
 Sump Capacity 40 gal  50 gal  50 gal  113 gal
 Pump Motor 3 HP  3 HP  5 HP 7.5 HP
 Electric Heater 6 kW 6 kW  9 kW  18 kW
 Power Available  208V, 1 Ph, 40 Amps
208V, 3 Ph, 24 Amps
230V, 1 Ph, 38 Amps
230V, 3 Ph, 23 Amps
460V, 3 Ph, 11 Amps
575V, 3 Ph, 9 Amps
 208V, 1 Ph, 40 Amps
208V, 3 Ph, 24 Amps
230V, 1 Ph, 38 Amps
230V, 3 Ph, 23 Amps
460V, 3 Ph, 11 Amps
575V, 3 Ph, 9 Amps
 208V, 1 Ph, 60 Amps
208V, 3 Ph, 37 Amps
230V, 1 Ph, 58 Amps
230V, 3 Ph, 36 Amps
460V, 3 Ph, 17 Amps
575V, 3 Ph, 14 Amps
 230V, 3 Ph, 58 Amps
460V, 3 Ph, 32 Amps
575V, 3 Ph, 26 Amps
 Dimensions 74”h x 45”w x 48”d 80”h x 50”w x 51”d 88”h x 50”d x 51”d 94”h x 49”w x 57”d
Ship Weight 985 lbs. 1100 lbs. 1065 lbs. 1380 lbs.

 

Model 4860 Series  7248 Series  7272 Series
Working Height  60 Inches  48 Inches  72 Inches
Turntable Diameter  48 Inches  72 Inches  72 Inches
 Load Capacity  5000 lbs.  5000 lbs.  5000 lbs.
 Number of Nozzles  26
Pump Capacity  200 GPM @ 50 PSI  160 @ 45 PSI  150 GPM @ 50 PSI
 Sump Capacity  156 gal 200 gal  200 gal
Pump Motor  7.5 HP  7.5 HP  7.5 HP
Electric Heater  18 kW (2) 9kW  (2) 9kW
Power Available  230V, 3 Ph, 67 Amps
460V, 3 Ph, 32 Amps
575V, 3 Ph, 26 Amps
 230V, 3 Ph, 60 Amps
460V, 3 Ph, 60 Amps
575V, 3 Ph, 60 Amps
 230V, 3 Ph, 60 Amps
460V, 3 Ph, 60 Amps
575V, 3 Ph, 60 Amps
 Dimensions  106”h x 66”w x 75”d  100”h x 105”w x 85”d  100”h x 85”w x 126”d
 Ship Weight  2457 lbs.  3200 lbs.

Call today to speak to one of our knowledgeable sales consultants who can help you find the right machine for your application

Denver
Grand Junction /Western Slope
Colorado Springs/Pueblo

303-287-7561
970-670-5016
719-434-4779